The sintering of a-alumina reinforced aluminium alloy matrix composites
David Miller · The University of Queensland · 2004
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
The University of Queensland · The University of Queensland · dissertation · 2004
Abstract
A series of experiments have been performed to determine the effect of volume fractionnof reinforcement and composition on the liquid-phase sintering of particulate a-aluminanreinforced aluminium alloy composites. Transmission electron microscopy (TEM) wasnused to analyse the structure of the reinforcement-matrix interface at high magnification,nwith an emphasis on the distribution of alloying elements.nnnnnnnn Green samples were prepared by mixing elemental metal powders with a-aluminanparticles.
This mixture was then placed in a die and compressed using a hydraulic press.nSamples were sintered at 625dC for 1 hour under a nitrogen atmosphere.nnnnnnnnnnnn n The results show that a critical volume fraction of reinforcement, Vfcrit, exists as predictednby percolation theory. At reinforcement levels lower than Vfcrit the sintered density of thencomposites is dependent on the driving force for sintering of the matrix alloy overcomingnthe adverse effect of the inert reinforcement particles on densification. At reinforcementnlevels greater than Vfcrit the sintered density is dependent on the composition of thenmatrix alloy.
Densification, in these samples, is dependent on the sintering liquid fillingnthe pores that result from pressing. These pores develop because a self-supportingnnetwork of reinforcement particles hinders compaction. The pore filling is dependent onnthe wetting of the particles by the liquid, which in turn is dependent on the compositionnof the matrix alloy.nnnnnnnn n It was further established that magnesium and tin improve sintering whereas copper andnsilicon have a deleterious effect. Transmission electron microscopy demonstrated thatnmagnesium is concentrated at the reinforcement-matrix interface.
It was concluded thatnmagnesium aids wetting by reducing the solid-liquid interfacial energy, while tinnimproves wetting by lowering the surface tension of the sintering liquid. Furthermore,nthe adverse effect of copper and silicon on sintering was attributed to the dilution ofnmagnesium in the liquid, that results from their addition.n
Open the resolved locator · 10.14264/106935
Metadata licence: OpenAlex metadata (CC0)