Macromodel of Precise Signal-Phase Meter
Matej Šalamon, Bojan Jarc · Modelling and Simulation in Engineering · 2012
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
Modelling and Simulation in Engineering · Hindawi Publishing Corporation · article · 2012
Abstract
This paper presents a precise macromodel of a signal-phase meter, which allows continuous phase measurement during simulation. It has been developed as a support tool during the design process of a signal-conditioning circuit for incremental position encoders. The development of a signal conditioning circuit requires precise measurements of small signal phases, amplitudes and offsets using the analog/digital circuit simulator. The phase measurement cannot be performed directly with a simulator, therefore an appropriate macro-model is needed for a circuit simulator.
The structure of the signal-phase meter is based on the conventional signal-phase measuring method and is intended for the measuring of a cosine-signal phase with a known frequency. It recommends that the time variations of an input signal’s parameters (amplitude, phase, frequency, and offset voltage) are slow and small as possible. Rapid change of a signal’s parameters decreases the simulation result’s accuracy. A macro-model’s precision mainly depends on the chosen parameters for the macro-model and for the simulation. We show that with the proposed meter’s model, the phase angle can be measured with an accuracy of more than ±0,02%.
Open the resolved locator · 10.1155/2012/856497
Metadata licence: OpenAlex metadata (CC0)