go-v.orgdoi

Supplemental material: Orogen transplant: Taconic–Caledonian arc magmatism in the central Brooks Range of Alaska

J.V. Strauss (9004271), et al. (281964) · Figshare · 2016

  • DOI 10.1130/2016366
  • Publisher Figshare (United Kingdom)
  • Type supplementary-materials
  • Issued 2016

Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.

Figshare · Figshare (United Kingdom) · supplementary-materials · 2016

Abstract

SHRIMP-RG U-Pb Zircon GeochronologyU-Pb isotopes and trace element compositions in zircon for igneous sample J1431 of the Apoon assemblage were analyzed together on the SHRIMP-RG instrument at the U.S.

Geological Survey-Stanford University Ion Probe Laboratory.Analytical procedures followed Barth and Wooden (2006, 2010).A primary ion beam spot size of ~20 m was used and pit depths are estimated to be 1-2 m from operating at 5-6 nA.Each analysis consisted of up to 5 peak-hopping cycles of 2-10 seconds per mass through the following: 30 Si 16 O+, 48 Ti+, 49 Ti+, 56 Fe+, 89 Y+, 139 La+, 140 Ce+, 146 Nd+, 147 Sm+, 153 Eu+, 155 Gd+, 163 Dy 16 O+, 166 Er 16 O+, 172 Yb 16 O+, 90 Zr 2 16 O+, 180 Hf 16 O+, 204 Pb+, 206 Pb+, 207 Pb+, 208 Pb+, 238 U+, 232 Th 16 O+, 238 U 16 O+.The instrument operates at a mass resolution (M/M) of near 7500 (10% peak height).Data reduction utilized the MS Excel add-in SQUID 2.51 (Ludwig, 2009) with an in-house task routine "SquidTask_Zircon 24pk w15pk Ti slope 2 (ppm MADDER).MAC.xls".U-Pb isotopic composition was calibrated with reference to replicate analyses of the standard zircon Temora-2 (416.8Ma; Black et al., 2004).Trace element measurements were normalized to 90 Zr 2 16 O+ and standardized with respect to the homogeneous zircon standard (MADDER; 3435 ppm U) which is calibrated relative to Madagascar Green (MAD) zircon (Barth and Wooden, 2010).Replicate analysis of standard zircon MADDER suggests compositional uncertainties are ± 1%-10% (1), except for La, which is ± 30%-55% (1).External uncertainty in the 206 Pb/ 238 U ratios calculated with respect to Temora-2 for this analytical session is 1.1% (2).Common lead corrections assume the modeled terrestrial lead isotope compositions of Stacey and Kramers (1975).The decay constant recommendations of Steiger and Jäger (1977) were used.Chondrite-normalized REE plots use the chondrite REE abundances of Sun and McDonough (1989).Weighted mean 207 Pb-corrected 206 Pb/ 238 U ages were calculated by utilizing a subset of concordant spot analyses.Individual spot ages are reported with internal uncertainty only, whereas weighted averages include an external uncertainty determined as the standard deviation of the standards within a given analytical session.

LA-ICPMS U-Pb Zircon GeochronologyU-Pb isotopic ratios for zircon from nine samples in the Doonerak fenster were analyzed by LA-ICPMS at the University of Arizona LaserChron Facility (Gehrels et al., 2006, 2008; Gehrels and Pecha, 2014).Zircon was ablated with a Photon Machines Analyte G2 excimer laser with a HelEx ablation cell using a spot diameter of 20 m.Helium carrier gas carries ablated material into the plasma source of an Element2 HR ICPMS, which sequences rapidly through U, Th, and Pb isotopes.Signal intensities are measured with an secondary electron multiplier that operates in pulse counting mode for signals less than 50K cps, in both pulse-counting and analog mode for signals between 50K and 4M cps, and in analog mode above 4M cps.The calibration between pulse-counting and analog signals is determined line-by-line for signals between 50K and 4M cps, and is applied to 4M cps signals.Four intensities are determined and averaged for each isotope, with dwell times of 0.0052 s for 202, 0.0075 s for 204, 0.0202 s for 206, 0.0284 s for 207, 0.0026 s for 208, 0.0026 s for 232, and 0.0104 s for 238.The ablation pit is ~12 m in depth using an energy density of ~5 J/cm2, repetition rate of 8 hz, and an ablation time of 10 seconds.Each analysis includes counting for 5 seconds with the laser off for backgrounds and 10 seconds with the laser firing for peak intensities, followed by a 20 second delay to purge the previous sample and save files.Unknown analyses in the Doonerak sample set were bracketed by the Sri Lanka ( 206 Pb/ 238 U age of 563.2 ± 4.8 Ma, 2, Gehrels et al., 2008) and R33 ( 206 Pb/ 238 U age of 420.53 ± 0.16 Ma, 2, Mattinson, 2010) standard zircons to assess reproducibility.Instrument setup, tuning, run parameters, standard-unknown bracketing, and data reduction followed that of Gehrels and Pecha (2014).For each analysis, the errors in determining 206 Pb/ 238 U and 206 Pb/ 204 Pb result in a measurement error of ~1%-2% (at 2 level) in the 206 Pb/ 238 U age.The errors in measurement of 206 Pb/ 207 Pb and 206 Pb/ 204 Pb also result in ~1%-2% (at 2 level) uncertainty in age for grains that are >1000 Ma, but are substantially larger for younger grains due to the low intensity of the 207 Pb signal.

Zircon Lu-Hf Isotopic AnalysisA subset of the detrital and igneous zircons was analyzed for Lu-Hf isotopic compositions using a Nu Instruments HR-ICP-MS connected to a Photon Machines Analyte G2 excimer laser equipped with a HelEX cell at the Arizona LaserChron Center.A separate aliquot of zircon from leucogabbro sample J1431 was analyzed for U-Pb by LA-ICPMS to document homogenous age domains prior to Hf analysis.In each analysis, a 40 m diameter ablation site is centered over the previously excavated U-Pb analysis pit.The analytical routine consists of a 40 second on-peak background measurement, a 60 second laser ablation measurement, and a 15 second washout time.Using a typical laser effluence of ~5 J/cm 2 and pulse rate of 7 Hz, the ablation rate is ~0.8 microns per second.Unknown analyses were bracketed by reference standards every 20 spots, including R33, SL2, Plesovice, Temora-2, FC-52, 91500, and Mud Tank (Woodhead and Hergt 2005; Sláma et al.

2008; Bahlburg et al. 2010; Vervoort 2010).These standards are included with unknowns on the same epoxy mounts.Instrument setup, tuning, run parameters, standard-unknown bracketing, and data reduction followed that of Gehrels and Pecha (2014).

Ar/ 39 Ar GeochronologyAn ~20 cm 3 aliquot of sample CH14DW16 from the Trembley Creek phyllite (from the same location as J1426; Figure 2, Table 2 of main text) was hand-crushed with a mortar and pestle at Stanford University.Muscovite was separated by electrostatic properties, sieved to various grain sizes, hand-selected to avoid contaminant phases and/or inclusions, packed in 5 mm x 1 mm thick copper foil packets, and stacked in 8 mm quartz tubes.Taylor Creek sanidine (TCs) flux monitors were interspersed with unknown samples at ~7.5 mm intervals to calculate J-factors as a function of vertical position during neutron bombardment.An age of 28.34 Ma was assigned to TCs to maintain consistency with the K-Ar age of GA-1550 biotite (98.5 ± 0.5 Ma; McDougall and Wellman, 2011), which is also included in the irradiation.Quartz tubes were sealed under < 1 Torr vacuum, positioned within an aluminum vessel, and irradiated for 8 h in a Gehrels, G.

Open the resolved locator · 10.1130/2016366

Metadata licence: OpenAlex metadata (CC0)