Signal design for Doppler processing
Ziad S. Haddad, B. E. Parkins · The Journal of the Acoustical Society of America · 1987
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
The Journal of the Acoustical Society of America · Acoustical Society of America · conference-abstract · 1987
Abstract
The Doppler sonar processing requires that the illuminating signal have a spectrum with low sidelobes over the range of frequencies at which Doppler shifts are expected. This is conventionally achieved by “windowing” the driving sinewave. Uncertainties in the amplitude response (threshold onset and linearity) of typical transducers make it desirable to have alternate means of obtaining low sidelobes. One approach is to transmit a series of nonuniformly spaced short pulses of constant duration and amplitude. Pulse start times are specified to yield the desired spectral shape using the approach of A. Ishimaru [IEEE Trans. Ant. Propag.
AP-10, 691-702 (1962)] developed for space tapering antenna array elements. The resulting spectrum is not affected by nonzero threshold onset or limited linear range. The sidelobe reduction that can be achieved depends on the number of pulses, hence, on the amplifier bandwidth. Amplitude shading and varying pulse durations allow the design of a second type of signal, a windowed cw signal that does not depend on threshold onset and is less sensitive to amplifier bandwidth. The sidelobe reduction achievable with this second design depends on the linear range.
Open the resolved locator · 10.1121/1.2024968
Metadata licence: OpenAlex metadata (CC0)