Influence of divergence tapered V-baffles on heat transfer behaviors in a rectangular channel
Warin Keaitnukul, Supapat Pingta, Arnut Phila, Khwanchit WONGCHAREE, Naoki Maruyama, Masafumi Hirota, Smith Eiamsa‐ard, Monsak Pimsarn · AIP conference proceedings · 2026
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
AIP conference proceedings · American Institute of Physics · conference-paper · 2026
Abstract
This study examines the effects of Divergence Tapered V-Baffle (henceforth DT-VB) regarding the heat transfer and friction loss behavior within the rectangle-shaped duct. The baffle attack angles (α) were set at 45°, 60°, 75°, and 90°. The experimental results indicated that as Reynolds numbers increased, the Nusselt numbers exhibited an upward trend, while the friction values showed a corresponding decrease. The Nusselt number improved consistently as the attack angle decreased, with baffles at a 60° attack angle producing the highest friction loss, followed by those at 45°, 75°, and 90°.
Among the configurations tested, the 45° attack angle demonstrated the best thermal performance due to its relatively low friction loss and enhanced heat transfer. The highest thermal performance factor (TPF) of 2.13 was attained at a 45° attack angle and a Reynolds number of 6,000.
Open the resolved locator · 10.1063/5.0341069
Metadata licence: OpenAlex metadata (CC0)