Plasma target output from a magnetically augmented, gas-injected, washer-stack plasma gun
John E. Osher · Review of Scientific Instruments · 1982
Not cached yet. This record was fetched live for this request and is stored after the lookup. Reopening the page should serve the cached copy.
Review of Scientific Instruments · American Institute of Physics · article · 1982
Abstract
This article describes a new washer-stack gun design developed for the application of plasma target production for the startup of neutral-beam trapping in a fusion research magnetic confinement system. The gun is a Mo anode type that is D2 injected and has an auxiliary pulsed magnet for control of plasma-flux mapping. One of the principal features of 2–10-ms duration pulses for gun operation in a suitable magnetic field is the formation of an arc column along magnetic field lines from the gun’s central cathode electrode to the vacuum chamber walls (at common anode potential).
The primary power output from a 5.0-cm-i.d. gun is typically carried along this arc column by a stream of approximately 2000 A of 50–250-eV electrons. This primary stream of relatively low-density energetic electrons efficiently ionizes the injected gas, forming a quasi-dc source of denser secondary plasma of ∼1013/cm3 at a few eV, which is able to flow or diffuse away along a somewhat larger column of magnetic field lines. In plasma-target production tests on a test stand, a gun operated at a D2 gas flow of 22 Torr ls−1 yielded 250 A of equivalent plasma flow.
Open the resolved locator · 10.1063/1.1136871
Metadata licence: OpenAlex metadata (CC0)